In describing the answer to the question below, try to share your opinions on the basis of evidences such as articles and books. Also provide information of the evidence (author, title, journal name, etc.).
1. Explain what happens in terms of mechanical/chemical properties when making products using metal-based 3D additive manufacturing technology. (10 points)mechanical properties
전통적
Fracture criteria for brittle material)
ⅰ. 최대수직응력기준 (Maximum normal stress criterion)
취성재료는 사전의 항복현상이 나타나지 않고 파단으로 갑자기 파괴되는 특성을 갖는다. 가량 단축 인장응력을 받는 경우, 그 부재가 파손되는 수직응력의 값은 인장시험 시 얻어지는 그 재료의 극한강도 와 같다. 따라
Ⅰ. INTRODUCTION
In fourth semester most of our department students attend the subject of mechanical manufacturing practice and we have made a bolt by ourselves. But the process was not a soft job. A bolt and nut is used diversely but it seemed that we don't know much about a importance and manufacture of bolts.
A bolt is a threaded fastener used in industry to make two or more mechanical
Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품이 받는 Stress 는 Tensile Stress 보다는 Shear Stress 가 주요하기 때문에 Solder 선택 시에는 Solder의 Tensile Property 보다는 Shear Pr
Tensile properties
인장 강도의 측정은 재료에 인장응력을 가해 견디는 강도를 측정한 것이다. 인장응력은 온도의 영향을 많이 받기 때문에 실험은 모든 재료가 같은 온도 하에서 실시되어야 한다. 또한 극한 UTS 측정시에는 온도와 Strain rate를 함께 고려하여야 한다.
3. Shear properties
Shear Property인 Shear M
Fatigue Failure Process
균열발생 단계(Crack-Initiation Stage)
공업재료는 연성이며 제조한 상태대로는 균열이 존재하지 않지만, 일반적으로는 입자, 함유물 등을 포함하고 있다고 가정한다. 미시적 크기에서 금속은 균질하지도 않고 등방성도 아니다. 또한 기하학적으로 응력집중(노치)이 되는 부분이 있다
<그림3: 유압식 만능재료 시험기>은 인장시험에 널리 사용되고 있는 유압식 만능 시험기이며 <그림4: 인장 시험 전후의 시편>는 이것을 이용하여 인장시험한 후 시험전후의 시편 모양(외양)을 비교해 놓은 것이다.
인장시험 후 시편은 단면적이 급격히 줄어드는 네킹(nec-king): 목이 생긴다는 뜻) 현상을
What is Amorphous metal?
Polycrystalline grains of varying shapes and sizes
Misaligned planes of atoms slip past each other easily, absorbing energy and allowing dislocations to move, making deformation permanent.
Grain boundaries represent weak spots
Also called Metallic glasses or glassy metals
Cooled faster than atoms can rearrange into a crystal.
Dislocation movement obstructed s
구조적 특징
이론적으로 인간이 만들어낸 물질 중 가장 강할 것으로 예상
그래핀을 원통형 구조로 변형시킨 탄소나노튜브의 경우 실험적 60 [GPa] 이상일 것으로 예상
뛰어난 탄성 변형률
뛰어난 전류 밀도
( 그래핀 : 200,000 [cm2/Vs] ]
[ 실리콘 : 1,420 [cm2/Vs] 이하 )
빠른 전자이동 속도 때